Still, you know how frustrating it can be to have a low battery in the middle of a busy day If you are an Android user. Today’s Android phones pack large, bright screens and high-end features that suck enough of power. Then are some practical tips for perfecting the battery life and maintaining the overall Android battery health.

Battery Life Explained: Are you Killing your battery in any of these ways?

We all want the best battery life out of our phones, but how we use and charge them can we can lose our Android battery health. Amidst the confusion and misinformation, it’s key to understand the dynamics of lithium-ion or lithium-polymer batteries, both similar in charging and life despite their safety and cost differences.  

Charging your phone always to, let’s say, 60%, can decrease and damage your battery capacity. Although some memory effect is observed in certain lithium-ion cells, it’s less prominent compared to old battery types like nickel-cadmium and nickel metal hydride.

With old batteries, it was essential to completely discharge before recharging to a hundred percent. Unexpectedly,  modern lithium batteries operate else due to their chemistry, causing you to minimize the time spent with high or low-capacity situations. 

But Alas! Lithium-ion batteries have not made significant progress. This leaves you to calculate just the software features to maximize your Android battery health and increase your battery life. But don’t take it too seriously especially if you plan to keep a new phone for a couple of years anyway so you want to make the most of your Battery. Here we are telling you, how to squeeze the most juice out of your battery.

1. Turn on your Power saving mode

Let’s quickly imagine! you’re going to be stuck in a situation where you need your phone battery to last longer than it typically does? 

Switch your phone into power saving mode, which automatically cuts back on functions that may destroy battery life. On our Android device, we opened Settings> Battery and Device Care and also tapped the Battery entry.   By tapping Power saving mode, we could further customize the point by turning off the Always on Display, limiting CPU speed to 70%, or decreasing brightness by 10% to save more battery life. 

There’s also a power-saving option in the Quick Settings menu.   Power-saving mode is an inbuilt function of Android phones that turns on automatically when the battery is below 30%. This pitched feature can add at least 90 minutes to your battery life. It’s helpful, especially in situations when you don’t have the option to charge your phone. 

2. Adjust Screen Brightness manually

Smartphone defenses are big, bright battery swillers. You probably do not need your device turned up to the brightest setting. You can adjust the brightness on your screen by going into the Display settings.

You can also open the pull-down screen and control the brilliance from there.   While you are at it, consider disabling bus brilliance. This feature adjusts based on your perceived requirements but can also raise the brilliance of your display more advanced than it needs to be. Turn off the switch of adaptive brightness and you can feel that your eyes and your battery will be saying Thank you! 

3. Set your Screen timeout

Screen timeout is the period during which the display shuts off automatically when not in use. When you spend a long period on your mobile screen, the more battery life you use up. You can fight this by setting the screen to turn off sooner than it might normally. However, this is the point to change, If you tend to abandon your unlocked phone on the table. On both Android and other smartphones, you can open Settings> Display> Screen timeout, and also select among some options, from 15 seconds to 10 minutes. 

4. Turn off your Location and wireless services

When your phone’s location service is turned on, your phone frequently checks for your current position and updates it constantly. This takes a lot of power and causes your battery to drain fast. Turn the location service off and close the apps that are using your current location.
Wi-Fi, Bluetooth, and mobile data use up battery life with each new clunk you accept. An easy way to save some battery is to open the pull-down shade on your phone and tap the Aeroplane mode button. This will immediately dissociate your phone from all these services and save some juice.

5. Avoid over temperature

Batteries best work at room temperature, which is about 68 °F (20 °C). Especially when your battery is fully charged, will empty much faster in extreme temperatures. This can be damage to your battery health.

• Avoid using your phone at each if the temperature is below indurating 32 °F( 0 °C).  
• Still, invest in an insulated phone case, If you live in a  cold region and spend a lot of time outside.  
• Only charge your battery at temperatures between 41 °F( 5 °C) and 95 °F( 35 °C).
• Instantly remove the phone from the charging as soon as possible to avoid damaging the battery, If the phone or charging feels hot to the touch during a charging session. 

6. Automate Your Phone Process

Still, you can always set up some automated function to improve your Android battery health, If this seems too important to handle automatically. Open device Battery and Device Care> Battery> further battery settings and turn on Adaptive Battery. This will let your phone learn your charging habits to conserve battery life until the coming charge. 

To turn the phone setting on your program routine you can also use Google Assistant. Open Google Assistant, tap your profile icon, and select Routines to produce new commands. Select a routine( or flap to produce a new bone)  also flap Add action. If you tell Google you are leaving the house, for instance, the phone will prompt you to switch to the power-saving mode or airplane mode.

7. Make your device fully charging

Charging your phone fully in one go can reduce battery health-related traps. A battery can only take a finite number of charging cycles, and by charging the battery in one go, you’re reducing the number of charging cycles to increase the battery’s lifetime. Charge your phone to 100% for bettered battery health. 

Conclusion

Now that you’ve learned 8 hacks to maintain Android battery health on your device, you can enjoy longer battery life, bettered performance, and a device that remains powered when you need it most. Flashback to regularly check your battery health, acclimate your settings, and follow stylish practices to ensure long-lasting battery life and bettered performance.

Faq’s

How do I check my phone battery health?

We can check Android battery health From the Settings menu:

1. Open the Settings app on your phone, and also select Battery.
2. Once you are in the Battery section, and if the information you are later is not incontinently egregious, look for an option similar to Battery operation.

How do I ensure my battery is 100% healthy?

1. Store it half-charged when you store it long-term.
2. Don’t completely charge or completely discharge your device’s battery — charge it to around 50.
3. Power down the device to avoid fresh battery use.
4. Place your device in a cool, humidity-free terrain that is lower than 90 ° F( 32 ° C).

Does limiting charging to 85 percent help?

Why should I only charge my phone to 85? It’s about maximizing battery capacity long term, in that case keeping the phone’s battery not too high and not too low is veritably effective. It’s been proved. You thus save further capacity long-term by circumscribing it to 85, it’s just a fact.

Is it okay to use the phone while charging?

There’s no peril in using your phone while it’s charging. When you use your phone while charging, the battery is charging at a slower rate than normal to allow enough power for the ongoing operation.